REDSTONEPEDIA › Circuits › Pulse shapers
Signal stretcher (pulse extender)
at least 30 ticks (1.5 s) · 20 blocks
Even the shortest input pulse comes out at least 30 ticks (1.5 s) long.
starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) · fits in 5×2×5
Every size 21
The best design for each size: pick one to see it.
| size | blocks | numbers |
|---|---|---|
| 4 ticks (0.2 s) | 2 blocks | starts after 4 ticks (0.2 s) · needs an input of at least 2 ticks (0.1 s) |
| 6 ticks (0.3 s) | 2 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 2 ticks (0.1 s) |
| 8 ticks (0.4 s) | 2 blocks | starts after 8 ticks (0.4 s) · needs an input of at least 2 ticks (0.1 s) |
| 10 ticks (0.5 s) | 5 blocks | starts after 1 tick (0.05 s) · needs an input of at least 2 ticks (0.1 s) |
| 12 ticks (0.6 s) | 17 blocks | starts after 8 ticks (0.4 s) · needs an input of at least 4 ticks (0.2 s) |
| 14 ticks (0.7 s) | 17 blocks | starts after 10 ticks (0.5 s) · needs an input of at least 4 ticks (0.2 s) |
| 16 ticks (0.8 s) | 13 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 18 ticks (0.9 s) | 17 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 20 ticks (1 s) | 20 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 22 ticks (1.1 s) | 20 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 24 ticks (1.2 s) | 13 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 26 ticks (1.3 s) | 20 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 28 ticks (1.4 s) | 20 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 30 ticks (1.5 s) (this page) | 20 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 32 ticks (1.6 s) | 13 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 36 ticks (1.8 s) | 24 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 38 ticks (1.9 s) | 24 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 40 ticks (2 s) | 13 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 64 ticks (3.2 s) | 13 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 128 ticks (6.4 s) | 13 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
| 256 ticks (12.8 s) | 13 blocks | starts after 6 ticks (0.3 s) · needs an input of at least 4 ticks (0.2 s) |
Try it
Hold IN under the view for a long press, tap it for a short one: the box marked OUT turns red while the output is on. Press play under the view to watch a demo on a loop; touch any other control to take over.
How this design does it: Stretches every input to one fixed length.
Build it
Download .litematic Download the design as text
The .litematic opens in Litematica (Minecraft 26.3): every block of the design in one region. The text file is the same build written as plain text, block by block.
Blocks used: comparator copper bulb observer redstone wire repeater sticky piston stone
Details: how it works, measurements and properties
In depth
Any input pulse, even a 1-tick one, gives an output pulse of at least L = 30 ticks (1.5 s), starting 6 ticks (0.3 s) after the input turns on. It handles every input pulse of 4 ticks (0.2 s) or longer.
Use it to make a brief signal (an observer's 2-tick pulse) last long enough for a slower part.
How to try it
Press play under the view to watch the demo on a loop (the badge reads demo with the step it is on; the same sequence is drawn as a timing diagram below). Touch any control to stop it and try the circuit yourself.
To try it: press and hold the IN button of the bar (or the cell tagged IN) to power that input; a quick tap sends a short 2-tick pulse.
Inputs are tagged in lime; the output is tagged OUT: the orange glass marker next to it glows while the output is on (the output strip by the demo badge shows its last 40 game ticks, 2 seconds). Drag to look around, pinch or scroll to zoom, step one game tick at a time with the step button.
Inputs and output over time
The input follows this schedule (the 3D view's demo plays the same). Lime: an input is on; orange: the output is on (taller = a stronger signal, 1 to 15). Time runs left to right in game ticks (20 ticks = 1 s).
Swipe the diagram sideways: the whole sequence lasts 1555 ticks (1 min 17.75 s).
Step by step (14 lines)
in 2 ticks (0.1 s): +6 for 30 in 3 ticks (0.15 s): no output <- not handled in 4 ticks (0.2 s): +6 for 30 in 5 ticks (0.25 s): +6 for 30 in 6 ticks (0.3 s): +6 for 30 in 8 ticks (0.4 s): +6 for 30 in 10 ticks (0.5 s): +6 for 30 in 15 ticks (0.75 s): +6 for 30 in 20 ticks (1 s): +6 for 30 in 30 ticks (1.5 s): +6 for 30 in 40 ticks (2 s): +6 for 30 in 60 ticks (3 s): +6 for 30 in 80 ticks (4 s): +6 for 30 in 120 ticks (6 s): +6 for 30
Measurements
| metric | value | what it means |
|---|---|---|
| L | 30 ticks (1.5 s) | the length of the output pulse |
| delay | 6 ticks (0.3 s) | the time from the input's edge to the start of the output pulse |
| min-pulse | 4 ticks (0.2 s) | the shortest input pulse handled correctly (every longer one works too) |
Notes from its designer
Stretches every input to one fixed length.
Properties
| Study | Pulse shapers |
|---|---|
| Kind | Signal stretcher (pulse extender) |
| Blocks placed | 20 (not counting the input levers or buttons the view adds) |
| Box | 5×2×5 (50 blocks of space) |
| Made of (the blocks that change state) | comparator, copper bulb, observer, redstone wire, repeater, sticky piston |
| Inputs / outputs | IN (repeater) / OUT |
| The same build is also | 30-tick pulse · 20 blocks (the same blocks, listed as another kind) |
| Design file | pulse-oneshot-pulse-extender-L30-v50-20b |
The design file
Design file (29 lines)
# Signal stretcher: at least 30 ticks (1.5 s) · 20 blocks # https://vjeux.github.io/redstonepedia/circuits/pulse/pulse-oneshot-pulse-extender-L30-v50-20b.html name: pulse-oneshot-pulse-extender-L30-v50-20b circuit: pulse-extender port input: -1 1 0 port output: 3 1 1 origin: 0 0 0 palette: A minecraft:repeater[delay=4,facing=north,locked=false,powered=false] B minecraft:repeater[delay=4,facing=south,locked=false,powered=false] C minecraft:comparator[facing=west,mode=compare,powered=false] O minecraft:observer[facing=north,powered=false] R minecraft:redstone_wire S minecraft:sticky_piston[extended=false,facing=east] W minecraft:waxed_copper_bulb[lit=false,powered=false] r minecraft:repeater[delay=2,facing=south,locked=false,powered=false] s minecraft:stone layer 0: . ...sO ..s.W ..s.s ..ss layer 1: SO ..WCR ..r.A ..B.A ..RRs